Hi Balejee,
Thanks for your help already am done this ,it's working fine .
Regards,
Suresh .
↧
Re: Diagnose Code
↧
HWM Disposal document
Hi Experts ,
Am unable to create HWM Disposal document in WWI report.
Pls guide me how to do it and how to connect the Disposal document .
Regards,
Suresh
↧
↧
Re: warning message:Regulation TSCA 8D: No substance is assigned to material KRF FERTILIZER
Hi Dinesh
This error is due to data inconsistency
You are using 100 materials in your organisation and if you want implement Substance volume tracking for particular Qty Restricted material “X” . Material ‘Z’ may contain 50% composition of X (Here “X’ is used as intermediate) for finished product “Z”. As per Standard F.M "CBRC_LIB_SPEC_FROM_MAT_GET" if you run the "RREGCH_FILL” programme it will check the all the materials for substance /Composition information. If you are not maintained any substance data system it will alert you . you may know that material doesn’t contain X composition , but how system will know with out checking substance information.
Here you are saying that you are assigned the substance to ‘ KRF_FERT’ to material 2163 and during performing task “Intial run” you may selected material range. So system was check all the material and throwing warning message. and also check KRF_FERT Material BOM which may contains any A,B,C,D composition data
if you select the specific material name 2163 instead of range , you cannot get any message , but this is not standard procedure.
Balajee
↧
Re: EHS-WA: missing table entries (functions, document types)
Hi Bern,
What i understand, There are some functions and document types are missing in your screen when you are using the Edit entry documents (WAE02).
If it possible can you please share your screen shot here.so we can easy understand and we will try to provide solution.
However, As per standard, the below functions and documents are display the entry screen. This all are configurable. you can modify as per your client requirement.
Functions for Application Toolbar
Post
Split document
Post change
Transfer location
Clear
Create Purchase Order
Cancel Post
Cancel Clear
Order & Clear
Create disposal document
Function List
Display Documents for Partner
Create Purchase Order Manually
Display Material
Display Purchase Requisition
Display Waste
Stock Overview
Display Mast. Data for Genertr
Stock for Waste in WM
Easy Entry
Assign Partner
Create Disposal Document
Display Follow-On Documents
Close Entry Document
Document category type
Processing w. int/ext.no.range
Proc. with int. quantity
general
Edward
↧
Re: HWM Disposal document
Dear Suresh
It was suggested to Customize the H.Waste Disposal documents Either in Smart form or Adobe forms instead of creating in wwi (We can create in wwi but you have import the concern regulatory standard templates and u have to insert the symbols ).
you can import standard regulatory templates for as per region you are implementing and prepare one function specification document with which tables / fields data from WM are to be be Mapped in to template. and discuss with Developer , they will create and define delivery document type for extracting the reports from. here iam attaching one HWD template for u r reference.
The above are my opinion only and let us see what our community experts will comment on this
Balajee
↧
↧
Re: HWM Disposal document
Nice Work Balajee!!!!!!!!!!!!!!!!!!!!!
↧
Re: HWM Disposal document
Hi !
Q. “Am unable to create HWM Disposal document in WWI report “
HWM is a mandatory document which is to be enclosed when you dispose hazardous waste in Unites states as per
http://www.epa.gov/waste/hazard/transportation/manifest/index.htm.
In SAP – EHS –WA, sap has provided the disposal document type HWM by default.
Also it has provided the disposal document too (Report template created in WWI.).
You can find that report template in Layout directory located in WWI directory.
Report template Name: “expl_hwm”. (You need both expl_hwm.doc and expl_hwm.dat for report template import.
So already you have a sample WWI template for HWM.
So what you have to do now..?
Import this report template into your SAP system.,
If you want to create a new form for HWM, look here for sample HWM forms,
understand the requirements, map the fields in the SAP EHS, and develop your own WWI report template.
Then link it to the disposal document type HWM. Now I answer your second question.
Q:Pls guide me how to do it and how to connect the Disposal document .
Your Report template (whether your custom made one or expl_hwm) is linked with the disposal document type HWM through “Generation Variant”.
So you need to enter the Generation variant here,
Click on details,
Assign the generation variant here. Thereby your report template is linked to the disposal document type.
Regards
Subash Sankar
↧
Re: No dangerous goods class was found for specification Error Message
Hello Dinesh
thank you for the detailed reply.
I have done the assignments and also assigned the classification to a material master.
When I create a delivery I keep getting the error that "Dangerous goods master record is not released"
I have also released it from DGPREL not sure where it is going wrong.
If possible share your id so that i can send screen shots
thanks
SK
↧
Re: HWM Disposal document
Hi Balaji !
100 % true...! another problem with import report template is, symbol compatibility..!
Dear Suresh,
If you creating this for your current project, create your own WWI document ! (again for moving the template to quality, production you have to do it through import function)
If you want to learn waste management, still you can depend on importing the existing template. !
Points to remember :
If you are working in IDES, the template is already there in the system..! probably you may miss the generation variant ! that you can create and link it to the disposal document type.
While creating the generation variant, in the application object, you have to mention "WASTEMGMT" as "Report Application".
Regards
Subash Sankar
↧
↧
Re: HWM Disposal document
I was also thinking to import the template and use but it seems to be hardcoded!
Good explanation Balajee & Subash !!
Dhinesh
↧
Re: EHS-WA: missing table entries (functions, document types)
Hi !
You are right on track. In the standard system, the default values are delivered.
If not you can configure it on your own.
1. Specify Functions,
2. Specify Document categories.
But configuring manually will take a lot of time, since you will have lot of doubts about right FM to be assigned..! Best way is to activate the building block.
Regards
Subash Sankar
↧
Re: HWM Disposal document
Hi Subash ,
Thank you thanks for your reply.
Regards,
Suresh.
↧
Re: SAP Time Management
Dear Rinni,
Defaulting the work schedule is done in the feature SCHKZ .Tcode is PE03.
the same can be done to default the time management status through TMSTA feature .
Regards,
Reddy.
↧
↧
Moving(transporting) Class/Char/phrase from Dev to Quality
Hi,
I have created a new CLASS with CHARACTERISTICS and PHRASES for SAP IH in our Development environment.
I now want to move the CLASS (TAB page) with everything included to our Quality (and then later Production) environments. Preferably with a transport number.
The only way I know currently is to create everything manually in every box!!!
I can upload the phrases with a LSMW.
Any ideas/guideline out there please?
Regards
Marieta
PS - we are not on EHSM .......... using version before that.
↧
Re: Moving(transporting) Class/Char/phrase from Dev to Quality
Hi,
If you have set-up RFC connections for your boxes, then you can move it via
BD91 - Characteristics
BD92 - Class
It will post via IDOC's
Thanks
Sashi
↧
Re: Moving(transporting) Class/Char/phrase from Dev to Quality
Hi Mari,
The Note describes some methods, choose the method that meets your requirements.
1146700 - Transferring the standard database structure
Edward
↧
Re: Moving(transporting) Class/Char/phrase from Dev to Quality
Dear Marie
If you want to transfer the object with Transport Request number from Development system to Quality .
First Ensure that Releasing of the Transport requests & Tasks for Particular object in the Dev environment
Execute the T.Code "STMS_import" in Target system (Quality Environment) .Automatically released Transport object in the Dev will be appeared in Quality ( In Real time Environment RFC will configure in b/w Dev , Quality & Prod).
Click on desired T.R Object Number and click on import request button (Highlighted in Yellow).
If you are not Authorized for above T.Code , Contact Basis person and inform the T.R Numbers ,they will perform the same task.
In quality you have to test these objects again if those are succeeded , then again you have release Transport Request & Task here for moving in to Production Environment.
Balajee
↧
↧
I am new to EHS
Hi All ,
I am new to EH&S module . Can you please advice how should I start learning and let me know materials which I can refer to get the basics of the module .
Let me also know the future of a EH&S ABAP as I will start programming in the module once I get idea on basics of EH&S.
Thanks
Suganth Kumar.
↧
Re: Moving(transporting) Class/Char/phrase from Dev to Quality
Hi John,
First time i am hearing RRD-->QA--> DEV, How is possible? Would you please give some example please?
Whatever, As per ASAP, we will go Golden--> QA--> PRD .Event you can't move TR in PRD. you can move till QA(If you have authorization only). else, we need to request to Basis team to move.
Dev Clint --> Developers can use this client to test their Customizing settings and then move to Golden Client.
As per your thread,Data import and data export option available in Phrase Management.
In classic version the basic data and tools supports to creating a first database as well as with data import and data export in productive systems.
Means you can exchange data between the following system constellations:
·Two SAP systems
· One client to another client.
You can import and export the following data:
· Sources
· Phrases
· Specifications (including dangerous goods data)
· Property trees and even Report templates.
Edward
↧
Re: I am new to EHS
Suganth,
I don't want to give more brief information about it. Because, Already Balajee was described you more information about how to start and where to start.
My advice is , in open market place available on SAP best practices for EHS . find the below link.
http://help.sap.com/saap/sap_bp/EHS_ERP605_CN/HTML/Content_Library_EHSM_EN_CN.HTM
Start to download and have a look all available scenario overview. start to practice as per business scenario.
This is the best way to understand the process
Edward
↧